Refer attached. Thought worth sharing with the group.
Kind Regards,
Sanjay Gandhi
Phone : +65-68952099
| "Bathula Raghuram (Mumbai - PIPING)" <R.Bathula@ticb.com> Sent by: materials-welding@googlegroups.com 12/03/2008 11:47 AM
|
|
Repeat request to all members to use appropriate subject line, please simply don't hit the reply button of old mails when posting a new querry.
Now back to discussion on the subject querry, B31.3 indicates, bolt should extend completely through their nuts, and it is concidered acceptable if the lack of complete engagement is not more than one thread.
From: carlos [mailto:carlosoliveros@terra.com]
Sent: Tuesday, March 11, 2008 11:47 PM
To: materials-welding
Subject: Re:[MW:655] Re: Consumables for API 5L GR X65
How are Friends?
The code ASME B31.3 has tolerance about the threads bolts in the Nuts( shall be full nuts)
How much threads bolts shall be nuts out
| Thank you. Regards. carlosoliveros@terra.com |
======================================================= Confidentiality Notice This communication and the information it contains:- (a) Is intended for the person(s) or organisation(s) named above and for no other person(s) or organisation(s). (b) May be confidential, legally privileged and protected in law. Unauthorised use, copying or disclosure of any of it may be unlawful. If you have received this communication in error, please contact us immediately by email at Postmaster@fwuk.fwc.com. =======================================================
--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---
No comments:
Post a Comment