Regards
Manpreet Singh
On Sat, 12 Feb 2011 18:15:49 +0530 Kalyan <chakri.cruise@gmail.com> wrote
>
Hi manipreet,
Can you tell me reference standard for the below statement.I heard and saw in asme it's 4 times the wall thickness.
Regards,
Chakri.
>
>Sent from my iPhone
>
>Sent from my iPhone
>On Feb 11, 2011, at 2:47 PM, "manpreet " <manpreetsin88@rediffmail.com> wrote:
>
>
--Dear Krishan,
>
>A weld for a welded pipe or a weld for an attachement to the pipe should not be located within a distance of approximately 6 times the pipe wall nominal thickness or 2" whichever is greater,
>
>Regards
>Manpreet Singh
>
>
>On Fri, 11 Feb 2011 09:08:43 , Krishnakumar M S <krishnakumarms01@yahoo.com> wrote
>Hi
>
>Regarding my previous mail for discussion about Minimum weld clearance betewwn PIPE weld and Branch connection, I want to the case for in ASME B31.3 (Process Piping)
>
>Thanks and Regards
>
>Krishnakumar
>FEDO
>
>----- Forwarded Message ----
>From: manpreet <manpreetsin88@rediffmail.com>
>To: "materials-welding@googlegroups.com" <materials-welding@googlegroups.com>
>Sent: Tue, 8 February, 2011 11:55:53 AM
>Subject: Re: [MW:9775] Minimum weld clearance in PIPING
>
>Dear Kumar,
>
>If you don't specify the design code, there would be an endless discussion for this topic (this has happened before) so please specify the code.
>
>Regards
>Manpreet Singh
>
>
>
>On Tue, 08 Feb 2011 08:51:10 +0530 Krishnakumar M S wrote
>>
>>Hi,
>>Hello,
>>I have a case where the edge of the CS pipe fitting (90 deg. Elbow) coincideswith the branch connection pipe's weld. Header size: 10" and Branch is 2". The fittingedge is supposed to be fillet welded onto the pipe.
>>Is this permissible?
>>Pls tell me the min. clearance between weld ( But weld & Socket weld)
>
>Thanks
>>
>>KrishnakumarFEDO
>>
>>
>>
>> --
>>To post to this group, send email to materials-welding@googlegroups.com
>>To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
>>For more options, visit this group's bolg at http://materials-welding.blogspot.com/
>>The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
>>
> --
>To post to this group, send email to materials-welding@googlegroups.com
>To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
>For more options, visit this group's bolg at http://materials-welding.blogspot.com/
>The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
>
> --
>To post to this group, send email to materials-welding@googlegroups.com
>To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
>For more options, visit this group's bolg at http://materials-welding.blogspot.com/
>The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
>
> --
>To post to this group, send email to materials-welding@googlegroups.com
>To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
>For more options, visit this group's bolg at http://materials-welding.blogspot.com/
>The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
>
>To post to this group, send email to materials-welding@googlegroups.com
>To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
>For more options, visit this group's bolg at http://materials-welding.blogspot.com/
>The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
>
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment