Mr sundaram
Details are not sufficient about coated surface, coating material and number of layers
Anyhow, dew point, relative humidity, selection of nozzle, viscosity of coating material , mixing ratio of coating matrial and application method etc., are criteria for such pin holes.
If you feel this is sudden issue , then concentrate with RH
T.Mahendran
ACC - power plant
ACC - power plant
KSA.
00966 - 0593423 767
From: Sundaram Sundaram <nss2410@gmail.com>
To: Materials & Welding <materials-welding@googlegroups.com>
Sent: Tue, December 7, 2010 9:06:49 AM
Subject: [MW:8549] Pin holes in Final coating
Hi friends,
After the finaal coating i have found large number of
pin holes on the surface.Can anybody explain what is the reason.
with regards & thanks,
sundaram
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment