Re: [MW:34288] Impact test requirement for Unlisted material (ASTM A707 L5 CL3)

Impact test not required.

Regards,

Venkadesh L 

On Sat, Jun 10, 2023, 5:37 PM aravind roche <aravindroche@gmail.com> wrote:

Experts,

please advise below,  I believe because of our service temperature the impact test is not required, please guide me. 

PQR material - A707 L5 CL3 to API 5L Gr X65

Thickness coupon: 25.4 mm

WPS qualified range is : 5 to 50.8 mm

Design code : B31.3

Qualification Standard : ASME Sec IX

Our Project MDT : 0° to 90°C

Service : Water

PWHT : Yes

Pre heat : Yes

Aravind.A

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/ec3be245-165e-41a9-a0a2-40f333501774n%40googlegroups.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAA_6cSf%2BMo9ipEinMvUWhXV4h0YerpcL8oa0KMLo-7QTkO3wvQ%40mail.gmail.com.