Re: [MW:34280] Digest for materials-welding@googlegroups.com - 3 updates in 3 topics

It's regarding Simulation PWHT.

Question- how to prepare 3 cycle Simulation PWHT for SA387 Gr. 11. Low Alloy Steel? 

How to select soaking time and temperature for three cycle. 

Regards, 

Navanath Kashid. 

On Thu, 8 Jun, 2023, 10:23 AM , <materials-welding@googlegroups.com> wrote:

materials-welding@googlegroups.com

Google Groups

Topic digest
View all topics

• Provide suitable welding electrode for Alloy steel . - 1 Update
• PWHT on Stainless steel to Carbon Steel Weld - 1 Update
• AWS D1.1 CJP and Fillet - 1 Update

Provide suitable welding electrode for Alloy steel .

Sunthar Ambikapathy <sunthar1974@gmail.com>: Jun 07 11:32AM +0530 Dear Quality Team,       Pl provide suitable electrodes for as attached PMI composition.       I was selected for the E11018 electrode. With Preheat 150 deg.       What is your option.., and welding procedure ?       Equipment : Air receiver Header ,Size Dia 250mm X 4mm.   Application : ESP / Bag filter pulsing header.   Services : 12 years old, power plant .   Defect: Fillet weld center of portion crack observed.   Chinese Power Plant.         [image: image.png][image: image.png]         -- Kind Regards   Sunthar A +91 9894100888

Back to top

PWHT on Stainless steel to Carbon Steel Weld

Shahil Saini <sainishahil98@gmail.com>: Jun 06 07:38PM +0400 Hello everyone, Good Evening, hope all are doing well,   As my subject indicates PWHT in SS to CS Weld joint, my question is what are the after effects if pwht performed in SS to CS joint??   In Addition, how to mitigate the after effects which occurred after pwht?   BM: SS 316L to SA516 Gr.70

Back to top

AWS D1.1 CJP and Fillet

Parminder Singh <parmsin2001@gmail.com>: Jun 07 03:32AM -0700 Dear Experts,   Will CJP WPS qualify for Fillet Welds ?

Back to top

You received this digest because you're subscribed to updates for this group. You can change your settings on the group membership page. To unsubscribe from this group and stop receiving emails from it send an email to materials-welding+unsubscribe@googlegroups.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CA%2B8p7iWo69OQhr3e6dJawswMr71%3D2NT2_jAtyBVsrLhnsqX7mg%40mail.gmail.com.