Re: [MW:33673] Regarding Flush Grind of weld Reinforcement

See General Note (e)

On Wed, Nov 9, 2022 at 11:24 AM Manoj Singh <manoj.singh1178@gmail.com> wrote:

Hi All,

Can anyone please provide the details regarding the said subject, whether it is allowed and if yes what are the criteria to be followed in the terms of NDT,

along with the  standards codes if any.

Thanks in advance.

With regards,

Manoj Singh

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAPkJdRJwQwOUFjfwEFvOrzF1g0bmodAswCFVrS-JstH%3DTOvX4w%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAGgFTW9TH4rAV871nLC_vOfgkYXxScpiOQ3QJ_N3jT5uC81Y0Q%40mail.gmail.com.