it can be flush ground because while doing PQR, we are testing without reinforcement. Since it is difficult to weld flush with base metal that is why some reinforcement based thickness is allowed. If u want to take RT keep some reinforcement for density difference.
THANKS & BEST REGARDS,
KG.PANDITHAN, BE, IWE, CSWIP 3.1,
ISO 9712 Level 2 in VT,
ASNT-Level II in PT,MT,RT & UT,
LA ISO 9001-2015,
International Welding Engineer.
CONSULTANT-WELDING & QUALITY
Mobile no: +919940739349
On Wed, Nov 9, 2022 at 8:54 AM Manoj Singh <manoj.singh1178@gmail.com> wrote:
Hi All,--Can anyone please provide the details regarding the said subject, whether it is allowed and if yes what are the criteria to be followed in the terms of NDT,along with the standards codes if any.Thanks in advance.With regards,Manoj Singh
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAPkJdRJwQwOUFjfwEFvOrzF1g0bmodAswCFVrS-JstH%3DTOvX4w%40mail.gmail.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJzm4eNmeRR93kUbpqH_%3DbvofF7WiB%2BwU1a%2BmfLQyOEmr70F%2Bg%40mail.gmail.com.
Comments