[MW:33682] Delivery Nozzle 20" Dia Fit up dap with shell

Dear All,

There is Nozzle of 20" dia should be welded with the Tank shell ( A fillet Joint). What should be the max allowable gap between shell and Nozzle.

Is 4mm gap is allowed?

Regards,

F.S. Nathan

QA/QC Engineer

On Thu, 10 Nov 2022, 8:08 am siril kumar, <siril.techi@gmail.com> wrote:

Hi Everyone,

We will have to do pipe to pipe connection through flanges. Our Pipe is 400 mm ID/ 8 mm thick MS Pipes. Fluid is chilled water from 7 to 25 Deg C. The Pressure on the Pipe Shall be 11 KG/cm2.  I am primarily referring 2 standards: ASME B31.3 & MSS SP-44.  B31.3 is primarily for the process Pipes. So I want to understand:

1) For chilled water can we refer any other standard other than 31.3

2)  For pipe Flanges  other than Standard of MSS SP-44 can we refer anything

3) Does IS/ BS Standard which refer flanges in Table give any reference to Pipe to pipe flange Standard 

Thanking you in Anticipation

Regards,

Siril 

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/75379fed-1291-4ddc-8623-40977c706636n%40googlegroups.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAE%2B-gCbC5mwcT7JMCiB%3D%3DbZm8LTxhB3VRVPuvnSL0xDerZOUsw%40mail.gmail.com.