Re: [MW:33788] Filler wire Button weld test

Dear Gents,

This is client spec requirements in most of the companies, as per KOC , we generally do button test

To confirm chemical composition of low alloy and high alloys electrodes per heat.

On Tue, 29 Nov 2022 at 3:55 PM, Ponnikumar <k.ponni1994@gmail.com> wrote:

Dear gentlemen,

My client inspector told me to do button weld test on plate for filler wire 309L . The dimension are follow as asme sec II c then need to do PMI verification 

My query is any requirements by code for filler wire button test for all filler and electrode and why it required ? 

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAKL%3DdYw73OyFYLq4yTHUB2cVqbuaDCCunxc73%2BaU0kJZurJd%2Bw%40mail.gmail.com.

--

Thanks & Regards,

RAJESH PATNAIK PITTADA.

Mobile : +919573410309 

              

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CANXK5ozXULMha%2BKxr9VKffqeSHaVLP8fFwYv5z-0BSWT0mVZSA%40mail.gmail.com.