We will have to do pipe to pipe connection through flanges. Our Pipe is 400 mm ID/ 8 mm thick MS Pipes. Fluid is chilled water from 7 to 25 Deg C. The Pressure on the Pipe Shall be 11 KG/cm2. I am primarily referring 2 standards: ASME B31.3 & MSS SP-44. B31.3 is primarily for the process Pipes. So I want to understand:
1) For chilled water can we refer any other standard other than 31.3
2) For pipe Flanges other than Standard of MSS SP-44 can we refer anything
3) Does IS/ BS Standard which refer flanges in Table give any reference to Pipe to pipe flange Standard
Thanking you in Anticipation
Regards,
Siril
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/75379fed-1291-4ddc-8623-40977c706636n%40googlegroups.com.
No comments:
Post a Comment