Wednesday, December 16, 2020

Re: [MW:31852] PWHT Requirement for Supports?

Dear J.Gerald  ,
Material is P-1.

On Wed, Dec 16, 2020 at 9:44 AM 'james gerald' via Materials & Welding <materials-welding@googlegroups.com> wrote:
Generally the Pressure containing Pipe Thickness is taken as the Governing thickness when welding non-pressure part support.

But in the latest version of code there are some exceptions for some P-No's and if you could be specific it will be clear.

Thanks & Regards

J.Gerald Jayakumar




On Wednesday, 16 December, 2020, 12:04:22 pm IST, bilal wahla <bilalwahla047@gmail.com> wrote:



Greeting ALL,

On my project we are doing PWHT on Thickness basis, Pipe thickness is 30.18mm
,Will we do PWHT of Welded Supports as per B31.3? 


Bilal Arshad 
P.W.H.T QCI 

Mobile: +966 580181061

Email: bilalwahla.047@gmail.com

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAMqL%2BROYYc4qzhMs9p%3Dr39KsXvUZXYe32G-CAYZ%2BBW3sj-K1wA%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/1030040285.867863.1608100956265%40mail.yahoo.com.


--
Respected Sir,

Please find the enclosed file.

Bilal Arshad Wahla
P.W.H.T QCI 

Mobile: +966 580181061

Email: bilalwahla.047@gmail.com

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAMqL%2BRORxpTYVPeXFq%2BOqwsGndUEa-bKvBhZHyYJ-gp_Rqx2Ww%40mail.gmail.com.

No comments:

Re: [MW:35289] Welding consumable for S355J2WP material

S355 J2 WP  is a weathering structural steel  It has better atmospheric corrosion resistance. Use E 8018 - W1/W2  Electrodes This is regular...