Could you send a sketch of the joint?
You question is not clear
Στις Πέμ, 3 Δεκ 2020 στις 7:34 π.μ., ο/η udaya bhaskar <dusroni@gmail.com> έγραψε:
Hello Mr. Ankith,Please refer for your clarification: PART UCL REQUIREMENTS FOR WELDED PRESSURE VESSELS CONSTRUCTED OF MATERIAL WITH CORROSION RESISTANT INTEGRAL CLADDING, WELD METAL OVERLAY CLADDING, OR APPLIED LININGS--On Wed, 2 Dec 2020, 06:12 Patel Ankit, <aapatel271@gmail.com> wrote:Dear Expert,--I hope all are well.My question is In after Tubesheet Bonding PWHT required or Not?Base Material : SA 516 GR 70. (Thk : 45 mm )Bonding Material : SA 240 GR 316. (Thk:5mm)Tubesheet Dia : 3000 mm( Note : Bonding plate SS 316 : 1 No joint on base material)Regards,Ankit Patel8140255303.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CALR-PuwRp0-NoHz6KXB6-4Y3tkTKmaB4pJxtF8HhM8ctpf3EtA%40mail.gmail.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CANii3RPebf2pFWS-%2BiPxoJnyobk7eWaxyqNskV1fKD4gJUEqzA%40mail.gmail.com.
Dr. Georgios Dilintas,
Dipl. Ing. In Aeronautic and Space Engineering
Ph.D in Mechanics of Solids - Computational Mechanics
A.I.S, A.N.I, IRCA Lead Auditor
Welding, Stress Analysis, Corrosion, QA/QC, Failure Analysis, Risk Analysis
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAPOi40BHXNPTU3iqZEqGHpPuxiYd%3DyS-wS_5Tonv6ehAXyTWfw%40mail.gmail.com.
No comments:
Post a Comment