Re: [MW:31842] measuring of the gap between edges of crack

Dear Albert.

Actually, I need it for F.F.S (crack area based on chapter 7 of API579) and I am looking for a reliable NDT method to measure HIC/ or even SWC from one accessible side.

Regards,

On Mon, Dec 14, 2020 at 10:59 AM 'albert anbarasan' via Materials & Welding <materials-welding@googlegroups.com> wrote:

Hi,

Please refer to NACE TM0284, for the measurement of cracks with respect to crack sensitivity ratio (CSR), crack length ratio (CLR), and crack thickness ratio (CTR).,

R Albert Anbarasan 

On Monday, December 14, 2020, 12:07:26 PM GMT+8, asghar...@gmail.com <asgharialigl@gmail.com> wrote:

Dear All.

Does any body have any experience about measuring of the gap between edges of crack especially for HIC or SWC? and which method would be useful?

Regards, 

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/f7fbe2f6-94d9-41a3-9cf9-558a6d579c14n%40googlegroups.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to a topic in the Google Groups "Materials & Welding" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/materials-welding/CK8GPQuhFE4/unsubscribe.
To unsubscribe from this group and all its topics, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/1825678550.322649.1607920619021%40mail.yahoo.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CALcH7WCXYJQGTQcw-vuTiPuLgCpew5xZndEHmDsTn26X%2BbckUA%40mail.gmail.com.