What is the thickness, Bevel configuration and materials specn?
PAUT is opot
Regards, S.SENTHILKUMAR
On Monday, 14 December, 2020, 02:22:33 pm IST, Ali Asghari <asgharialigl@gmail.com> wrote:
Dear Albert.
Actually, I need it for F.F.S (crack area based on chapter 7 of API579) and I am looking for a reliable NDT method to measure HIC/ or even SWC from one accessible side.
Regards,
On Mon, Dec 14, 2020 at 10:59 AM 'albert anbarasan' via Materials & Welding <materials-welding@googlegroups.com> wrote:
--Hi,Please refer to NACE TM0284, for the measurement of cracks with respect to crack sensitivity ratio (CSR), crack length ratio (CLR), and crack thickness ratio (CTR).,R Albert AnbarasanOn Monday, December 14, 2020, 12:07:26 PM GMT+8, asghar...@gmail.com <asgharialigl@gmail.com> wrote:Dear All.Does any body have any experience about measuring of the gap between edges of crack especially for HIC or SWC? and which method would be useful?Regards,--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/f7fbe2f6-94d9-41a3-9cf9-558a6d579c14n%40googlegroups.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to a topic in the Google Groups "Materials & Welding" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/materials-welding/CK8GPQuhFE4/unsubscribe.
To unsubscribe from this group and all its topics, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/1825678550.322649.1607920619021%40mail.yahoo.com.
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/materials-welding/CALcH7WCXYJQGTQcw-vuTiPuLgCpew5xZndEHmDsTn26X%2BbckUA%40mail.gmail.comhttps://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit
.
No comments:
Post a Comment