Re: [MW:31240] Eccentric Reducer (Fitting to fitting) Seam Orentation

See UW-9(d), if you are using ASME Section VIII Div 1 as your construction code

On Tue, Jul 21, 2020 at 6:54 AM 'Dinesh' via Materials & Welding <materials-welding@googlegroups.com> wrote:

Dear all,

Eccentric Reducer (Fitting to fitting)  fit up, seam matching as below,

In this case,what is requirement need to follow and what is exact reason to do 1 inch. flushing on seam .

Thanks

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/baf9d41c-0489-493e-8699-7acebc37e5bdn%40googlegroups.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAGta9%3DuWFVnrMDDQ0W97B9%2BjHVN-4Nk0dJMPeFs2BEatVwJX8g%40mail.gmail.com.