Monday, July 13, 2020

[MW:31141] Re: out of straightness tolerance for B31.3 piping


Hi u can refer the code - ASTM 999, where table no-2  shows the straight ness of piping.



On Saturday, April 23, 2011 at 1:22:24 PM UTC+5:30, Raj wrote:
Hi,

A 358 is specifies about variations in dimensions as mentioned below.
Refer 7.1.3 ??

7. Permissible Variations in Dimensions
7.1 Permissible Variations—The dimensions at any point in a length of
pipe shall not exceed the following:
7.1.1 Outside Diameter—Based on circumferential measurement, 60.5 % of
the specified outside diameter.
7.1.2 Out-of-Roundness—Difference between major and minor outside
diameters, 1 %.
7.1.3 Alignment—Using a 10-ft or 3-m straightedge placed so that both
ends are in contact with the pipe, 1⁄8in. [3 mm].
7.1.4 Thickness—The minimum wall thickness at any point in the pipe
shall not be more than 0.01 in. [0.3 mm] under the nominal thickness.

Other code A530 (Standard Specification for General Requirements for
Specialized Carbon and Alloy Steel Pipe) is specifies "Straightness
Tolerances" and mentioned in table-3. (But this is not applicable for
your case) - For your info only.

I just want to throw some light on your query !!!

Cheers!

Raj


On Apr 21, 3:30 pm, biju <biju....@gmail.com> wrote:
> Hi,
>
> We received some stainless steel pipes A358TP316L 16"SCH-10S having an
> out of straightness 23 to 25 mm .Pipe length is around
> 11.800mtrs.Client rejected those pipes.Is B31.3 saying any thing about
> out of straightness requirements. If their please provide me the
> details. Also is their any manufacturing spec requirements for this?
>
> regards,
>
> Biju

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/a7dcd90b-8275-4e77-9d88-f4e7fa58362bo%40googlegroups.com.

No comments:

Re: [MW:35289] Welding consumable for S355J2WP material

S355 J2 WP  is a weathering structural steel  It has better atmospheric corrosion resistance. Use E 8018 - W1/W2  Electrodes This is regular...