Dear Sandeep,
What is the reference code section to support the first option.
On Thursday, 9 July 2020, 12:26:27 GMT+1, Sandeep Pr <prsandeep61@gmail.com> wrote:
Dear Chris,
There are 2 Options.
1) You can Weld an additional Test Coupon with 3G Position using qualified 3G WPS parameters. Then You can Carryout onlyImpact Test as per Material Requirement/ Project Requirements. If Impact test results found satisfactory, WPS will be qualified for all Positions.
OR
2_You Can develop a New WPS for 2G Position which will qualifies Flat & Horizontal.
With Regards,
Sandeep.P.Raghavan
On Thu, Jul 9, 2020 at 8:01 AM Regino Millan <regino.millan9@gmail.com> wrote:
hi you should develop new wps for 2g because horizontal position 3G vertical position.--On Thu, 9 Jul 2020 at 11:45, chris <chrissabu28@gmail.com> wrote:Hi friends
I have made a wps in 3g as per AWS d1.1 , I was under the impression that if I qualify in 3g it will automatically be qualified for flat and horizontal.But it seems there is a code restriction for this and I can weld only 3g for production welds.
My doubt is if i make one more test coupon in 2g for the same wps and get it qualified will it work??
Or should I need to create a new wps jus for this 2g position ??
Thanks in advance
Chris
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/20faa944-10b0-405c-9707-39f286836ff5o%40googlegroups.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAAQ8hN1r%3DXyg0KzgdOF6akoA7d4nr%3DUfN4N9Uk4NJz8sUE%3DtTw%40mail.gmail.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAFBEtQo7ZtzhcpmUcL18tPRCTbceQe6%3DZm_M5Dit55rSVcf-_A%40mail.gmail.com.
No comments:
Post a Comment