Tuesday, July 21, 2020

Re: [MW:31170] API 6A MONOGRAMMED COMPONENTS MATERIAL CLASS

Matl Chemistry  requirement.is.to be controlled.as.specified


On Tue, 21 Jul 2020 at 19:38, Prakash Hegde
<pb.hegde@yahoo.com> wrote:


Hl
Yes material mech properties e.g if you select ASTM 4130
YS OF 75ksi min
65ksi  is specified in API spec
Hardness restriction is same.for.all grade
Regards

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/2000785595.4254730.1595340644899%40mail.yahoo.com.
By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

[MW:35346] Cast-iron welding

Any advice for cast iron welding Sent from Yahoo Mail for iPhone

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...