Re: [MW:30695] Procedure qualification

Hi dear,  are you using b31.3 as the construction code. 

Pl clarify, 

Regards, 

Charles  V Jacob 

 

On Mon, Apr 6, 2020, 2:00 PM chiluka venkatramulu <ramuluchiluka@gmail.com> wrote:

Dear All,

A welding procedure is qualified with multiple PQRs as below

1. 3.05mm
2. 4.19mm
3. 6.0mm
4. 25.0mm

With impact requirement.

Now what is the thickness range qualified.

Thanks and regards,

Venkatramulu CH

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAF98%2BdFJX%2B%2B8s4ZU0fCuGeWcGfih9rH_D7EUxJv4hZjPohLgvg%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAKpzM4Bx4U0Eqy3o1PvdSd7u2H_NazQLHxcrSO4Dy4msO1CNUw%40mail.gmail.com.