Re: [MW:30267] Selection of 10%weld joints of pipeline

Please select one joint for RT out of 10 joints welded

We are following this practice here in saudi Aramco 

Mohammed Tajuddin

On Sat, 7 Dec 2019, 8:40 am Aakash, <harenathjha@gmail.com> wrote:

Hello expert ,
We are having 10% RT, pipe size is 16inch, please suggest should I select one complete joint or one segment of all the joints. Please provide the codal reference if any ?

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/01379daa-22dd-4bfd-ae0b-335e77f9e8d5%40googlegroups.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CACZrEUb%3D_trgLnxoQDyYR-%3D%2BpPt6DCi-TE5da%3DZuwrKSMYY%2BsA%40mail.gmail.com.