Re: [MW:30254] WPS of HOT TAPPING

Dear All.

I have found the answer of my question.

ASME PCC2 explain and say about in service welding that would be used for hot tapping.

Regards.

On Wed, Dec 4, 2019, 11:25 AM <asgharialigl@gmail.com> wrote:

Dear All.

If we want to qualify a WPS for hot tapping on pipeline, we shall apply Appendix B of API1104.

But for hot tapping of piping section for qualification of WPS, which code have to be applied, with regard to ASME IX doesn't mention to in service welding?

Regards

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to a topic in the Google Groups "Materials & Welding" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/materials-welding/1nVZMJ0WqJo/unsubscribe.
To unsubscribe from this group and all its topics, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/1f432d89-8224-49ba-a8f0-fb716bf6a663%40googlegroups.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CALcH7WB1c2-tPOSqVgKAkGw9ay12megx8U_G5tKitWOE0c9Tpg%40mail.gmail.com.