Hello piers
After the greetings!
We have purchased ASTM A283 Gr-C, all the components are meeting the requirements however manganese is found 1.04% against specified 0.9%.
The use is for tank bottom.
Could someone suggest what could be consequences if we use this material.
Thanks in advance for your valued comments.
Regards,
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/ebd0071d-adf2-42e1-910e-7125059ad33b%40googlegroups.com.
Subscribe to:
Post Comments (Atom)
-
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
-
Definition of buttering from ASME Section IX, QW/QB-492 Definitions: Buttering: the addition of material, by welding, on one or bot...
-
Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...
No comments:
Post a Comment