Dear Sir
-- But in QW-453, Note:9 mentioned for chemical composition for hardfacing overlay procedure qualification testing?
On Thursday, 23 May 2013 02:03:26 UTC+5:30, Biplab Pal wrote:
On Thursday, 23 May 2013 02:03:26 UTC+5:30, Biplab Pal wrote:
Dear Experts,
Please give me the guide for Hard facing Overlay:
We did a) Visual Examination, b) LPT, c) Hardness Test, d) Macro, e)
Weld Metal chemical analysis.
Is there any other mechanical or other test required for HFO like
Tensile or Bend test required?
Please guide me with ASME Sec IX 2010.
--
Thanks & Regards
Biplab Pal
Welding Inspector
E-mail: bipla...@gmail.com
Information in this email and any attachments is confidential and intended
solely for the use of the individual(s) to whom it is addressed or
otherwise directed. Please note that any views or opinions presented in
this email are solely those of the author and do not necessarily represent
those of the Company. Finally, the recipient should check this email and
any attachments for the presence of viruses. Myself accepts no liability
for any damage caused by any virus transmitted by this email.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/31d4aa89-c33a-4af2-b829-70717ab42fea%40googlegroups.com.
No comments:
Post a Comment