Body and bonnet is tested at the outlet flange pressure rating.
Check ASME VIII-1 UG-136 d)2)
On Tue, Dec 24, 2019 at 3:39 AM Eyup Tan <eyuptan@gmail.com> wrote:
API 5262.3 Valve SelectionFor valves described in this standard, inlet and outlet
flange sizes and pressure-temperature ratings shall conform
to the data in Tables 2 through 15 for spring-loaded valves
and Tables 16 through 29 for pilot-operated valves. Inlet and
outlet pressure limits are governed by the flange
pressure/temperature limits or by the manufacturer's design
limits, whichever is lower.Saygılarımla, / Best Regards,Eyup TanMobile: +90 535 334 4912--On Tue, Dec 24, 2019 at 8:23 AM chiluka venkatramulu <ramuluchiluka@gmail.com> wrote:Can you give me any code reference pl.Regards,Venkatramulu CH--On Tue, Dec 24, 2019 at 9:07 AM Eyup Tan <eyuptan@gmail.com> wrote:#600 rating because #600 flange for inlet and #300 is for outlet (exhaust) flange--RegardsEyup TaniPhone'umdan gönderildichiluka venkatramulu <ramuluchiluka@gmail.com> şunları yazdı (24 Ara 2019 06:08):Dear All,--If PSV having flange rating 300 X 600, which rating is considered for testing Body & Bonnet, as per B16.34.With Best Regards,Venkatramulu CH
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAF98%2BdEjRwiKGN8%3DoE-Zqih6F-pDD_KfRr-4QB2ZUEX%2BHoD9gw%40mail.gmail.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/07427C0B-5FA7-4BCC-87B3-C9864BC5133A%40gmail.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAF98%2BdG8UEFMP-SDMv2yujK1VFBeCY8Zvj%2BQFq5nQVQxDWRUiQ%40mail.gmail.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAPfEVaPAqWu7KYp1zrO5%3DyfrgYKbfhOwHKDjLk8rhfVWOt6Vzg%40mail.gmail.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CADdW5amBwBf9J8SMe%3D6Ly_b%2BVuJM8JsaPRsyiLhYKJ_L_gvbBQ%40mail.gmail.com.
1 comment:
great
Post a Comment