Re: [MW:30151] Corrosion allowance for TEMA heat Exchangers

e.g if you specify CA 3.0 mm for a 2.0 mm tube , will it work effectively?

On Wed, 16 Oct 2019 at 09:47, 'sudipto banerjee' via Materials & Welding <materials-welding@googlegroups.com> wrote:

Hi friends,

Can anyone let me know why there is no consideration of Corrosion allowance for CS parts according to TEMA clause RCB 1.516 thru 1.518 pls.

Best Regards,
Sudipto Banerjee

-

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CADxVubkSEuuQT9-O%2BPb0fxYAVHCHy8Zfyr2eCneYR56UoBNarg%40mail.gmail.com.