Re: [MW:28863] EN 10204 Type certificate

Hi Vivek,

Please check that the certificate should be independently endorsed by manufacturer's Quality department. It is also to be declared by manufacturer that requirement of 3.1 has been fulfilled by mentioning the same (EN 10204 3.1) on certificate.

Hope, it is clear.

Thanks,
Warm Regards,

Rajnish Dixit

On Thu, Jan 3, 2019 at 18:41, vk

<vivekmohan007@gmail.com> wrote:

Gents,

Manufacturer has issued MTC fulfilling all the requirements as mentioned in EN 10204 3.1.

But nowhere it mentions as "EN 10204 Type 3.1"

Can this be considered or do they have to mention that it complies with the requirements of EN 10204 Type3.1"

Regards

Vivek

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.