Re: [MW:28861] Re: Material certification EN 3.1 OR 3.2 ?

Hi Siraj,

Please be informed that here requirement is for 3.2 certification. Whenever there is requirement of certification by third party it is 3.2. 

Hope, it is clear.

Thanks,
Warm Regards,

Rajnish Dixit

On Tue, Jan 1, 2019 at 13:00, Mohd Siraj

<mohd52100@gmail.com> wrote:

EN 3.1

On Monday, December 24, 2018 at 1:39:23 PM UTC+3, shaikh ahmed wrote:

Dear Expert,

Please can you advise on below snap shot of Specification asking for EN 3.2 Material certification correct me ?

it calling for EN 3.2 OR 3.1

thanks.

Ahmed

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.