Re: [MW:27390] Preheat

If you are decreasing pre-heat tepm. More then 55c it will be essential variable.

In this this case you need re-qualification.

Regards,

Ishtiaq

On Feb 26, 2018 9:43 AM, "sankar rao" <sankarkorukonda@gmail.com> wrote:

Dear friends,

   Essential variable for preheat what is the meaning of

Decrease>55°c (QW406.1)

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.