Gentleman,
Below is a helpful compilation on your query. Experts in group may please add value, if desired.
Girth flanges are used for mating two segments of a pressure vessel. These parts are also widely used in shell and tube heat exchangers and other process equipment to mate various components. There are two common kinds of girth flange such as welded hub joint, loose type (without hub).
You may like to check the link ===>> http://www.eng-tips.com/viewthread.cfm?qid=377158
Best Regards,
Vinod Bhatt
On Tue, Feb 27, 2018 at 9:09 AM, PK M <pkmqaqc@gmail.com> wrote:
Dear Experts,Any standard for Girth Flanges ?Thank you.
--On Sun, Feb 25, 2018 at 12:49 PM, PK M <pkmqaqc@gmail.com> wrote:Dear Experts,What is mean by Girth Flanges ?Thank you.On Sat, Feb 24, 2018 at 3:39 PM, PK M <pkmqaqc@gmail.com> wrote:Dear Sir,Please explain with photographs for Girth Flanges of Process Equipment and Heat Exchangers
Thanks.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com .
Visit this group at https://groups.google.com/group/materials-welding .
For more options, visit https://groups.google.com/d/optout .
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
Comments