Thursday, February 22, 2018

Re: [MW:27366] Nomenclature - Defination

OS&Y- Outside Screw and yoke,
RSNRO- Rising stem, non rising handwheel.

On Feb 22, 2018 3:15 PM, "Dharmesh Mistry" <dhamtech@gmail.com> wrote:
Dear Sir,

What is full definition of OS&Y / RSNRO for stem under GATE VALVE?




--
Thanks, & With Best Regards,

Dharmesh 

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

No comments:

Re: [MW:35501] TEST COUPON ASME SEC IX

Yes, You can machine the Plate.  Prepare the Welding Running Sheet and mention 14 mm Plate machined to 8 mm Plate.  then the groove weld qua...