Wednesday, February 21, 2018

Re: [MW:27361] Cromium limit to maintain back purging

Dear everybody,
Can anybody pls give me any code reference regarding this issue. I searched B31.1 , B31.3,  ASME but i did not find  minium chrimium percentage written on the code.

Is code silence regarding this issue.

Waiting for your valuable reply.

thanks in advance

regards
pradip

On 20 Feb 2018 12:19 pm, "Kannayeram Gnanapandithan" <kgpandithan@gmail.com> wrote:
ref B31.1 or B31.3, and lot of books 

Virus-free. www.avast.com

THANKS & BEST REGARDS,
KG.PANDITHAN, BE, IWE,  AWS-CWI, CSWIP 3.1,
CONSULTANT-WELDING & QUALITY
Mobile no: +919940739349

On Tue, Feb 20, 2018 at 12:39 PM, pradip kumar Sil <pradipsil@gmail.com> wrote:
Dear Sir,
Can you pls provide me code references.
Thanks in advance
Pradip

On 20 Feb 2018 8:53 am, "Kannayeram Gnanapandithan" <kgpandithan@gmail.com> wrote:
Grater than 3% Cr, purging

On 20-Feb-2018 9:51 am, "pradip kumar Sil" <pradipsil@gmail.com> wrote:
Dear everybody,
Can anybody inform me minimum how much percentage of cromium limit to maintain back purging with code reference.
Thanks in advance
Pradip

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

No comments:

[MW:35725] Dismillar material Welding

Dear experts,  In my Hydro Electric Project  materials using A517Gr.F and A537CL-II.  For A517Gr.F using E 11018M and A537CL-II using E 9018...