You are wrong. When Asme is applicable and wenn tack welds are to be removed no need for qualification
Sent from my Samsung Galaxy smartphone.
-------- Original message --------
From: cd murali <cdmurali09@gmail.com>
Date: 25/06/2017 17:13 (GMT+01:00)
To: materials-welding@googlegroups.com
Subject: Re: [MW:26649] ASME Tack welder Qualification
All welders, welding operators, brazers, and brazing operators shall be qualified in accordance with the ASME SEC IX ,for all welding, including tack, temporary Welding.
Regards
C.D.Mural
i
| QA/QC Welding/Piping Inspector
| M.S. Al-Suwaidi Industrial Services Company Ltd| Rabigh Phase-II Petrochemical Project (G.S.T), AR-4501|
On Fri, Jun 23, 2017 at 1:26 PM, Karunakaran Pasupalagovindasamy <pgkaruna@doosan.com> wrote:
--Dear Experts,
Is there any ASME clause for Tack welder qualification?
Kindly share the input.
Regards,
Karunakaran. P.G.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com .
Visit this group at https://groups.google.com/group/materials-welding .
For more options, visit https://groups.google.com/d/optout .
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment