[MW:26602] Re: ASME B31.3 -2014 Table 331.1.1 Soaking time for P1 material

For P1 material up to 20 mm thickness no need PWHT.

On Monday, 29 May 2017 15:33:46 UTC+5:30, SWI wrote:

Hi Team,

Could any please clarify

What is the minimum required soaking time for P1 material with wall thick 12mm, as per ASME B31.3 year 2014 Table 331.1.1 .

Is it still Minimum one hour per 1 Inch wall thickness or Minimum 15 Minutes...

Regards,

Ram

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.