Thanks Mr. Dinesh.
Explain in specific, as per ASME section 1, for non pressure parts with pressure parts welding, during fit up, for tack welding welder qualification process.
On Jun 25, 2017 3:38 PM, Dinesh Somwanshi <som.din@gmail.com<
The tack welder clause available in AWS D1.1 with hammer break test with shown complete fusion .
Thanking You,
With Regards..
Dinesh V Somwanshi
Api 570, Cswip 3.1,Bgas 2
Authorised Certified Piping, Welding, Painting Inspector.
00919881344135
On Jun 25, 2017 12:11 PM, "ΓΙΩΡΓΟΣ GEORGIOS D." <dilintas@gmail.com> wrote:
-- --There is no specific tack welders qualification. If tack welds are performed by non qualified welders they have to be grinded off
Sent from my Samsung Galaxy smartphone.
-------- Original message --------From: Karunakaran Pasupalagovindasamy <pgkaruna@doosan.com>Date: 23/06/2017 13:26 (GMT+02:00)Subject: [MW:26639] ASME Tack welder Qualification
Dear Experts,
Is there any ASME clause for Tack welder qualification?
Kindly share the input.
Regards,
Karunakaran. P.G.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com .
Visit this group at https://groups.google.com/group/materials-welding .
For more options, visit https://groups.google.com/d/optout .
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment