Wednesday, June 7, 2017

Re: [MW:26593] NDT Requirement

HI,

Dear , Its need to informing you that the CONSTRUCTION CODE is minimum requirement in project in fabrication but not limited. While will give you more idea of additional if any project requirements of NDT scope.

I have notified additional requirements in  project specification.

Thanks & Regards

DINESH VITTHAL SOMWANSHI

BACHELOR IN MECHANICAL ENGINEER

AUTHORIZED PIPING / WELDING / NDT / PAINTING INSPECTION PERSONNEL
API 570 - Piping Inspector, AWS - CWI , CSWIP 3.1*,*BGAS  Gr 2 / 3
NDT II -UT , RT , MT , PT, VT
+7 924 374 6660 Russia , 00919881344135 India
Skype = dinesh somwanshi

असो द्यावी दया तुमच्या लागतसे पाया.

*Pray for others, sometime, You might never need to pray for yourself
again.....*


On Tue, Jun 6, 2017 at 8:50 PM, 'Dinesh Ravi Shankar' via Materials & Welding <materials-welding@googlegroups.com> wrote:
NDT not required for pipe support as per AWS D 1.1 unless not touch with piping weld joint.
 
Thank you & Best Regards,
________________________________________
Dinesh Ravi Shankar,



On Tuesday, June 6, 2017 5:12 PM, Dinesh Patil <dinn.patil@gmail.com> wrote:


Dear All,

Can you please tell me whether NDT is require OR not for pipe support weld.

If yes then where it is mentioned means which clause in AWS D1.1

Thank you

DINESH
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.


--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

No comments:

Re: [MW:35289] Welding consumable for S355J2WP material

S355 J2 WP  is a weathering structural steel  It has better atmospheric corrosion resistance. Use E 8018 - W1/W2  Electrodes This is regular...