Re: [MW:24278] welding of Slip on flange to Pipe

Dear sir,

Generally will be 3-4 mm max. If we extent then could be chances that flange serration get damaged.

Regards

Dinesh

DINESH VITTHAL SOMWANSHI

BACHELOR IN MECHANICAL ENGINEER

AUTHORIZED WELDING / NDT / PAINTING INSPECTION PERSONNEL,

AWS - CWI , CSWIP 3.1

BGAS  Gr 2 / 3

NDT II -UT , RT , MT , PT, VT

00919881344135

असो द्यावी दया तुमच्या लागतसे पाया.

Pray for others, sometime, You might never need to pray for yourself again.....

On Sat, Feb 13, 2016 at 3:04 PM, DHANUSH PR <pr.dhanush@gmail.com> wrote:

Hello Welding Experts

Attached here with a drawing of Slip on flange welding with a Pipe. As per ASME B 31.1/ASME Sec VIII Dev 1 what is acceptable value of 'y' i.e. distance between raised face flange and weld on pipe.

Regards

Dhanush P R

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/9113b938-df01-4973-8582-f1eb9b8729b0%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAELgRrWgVvgJsb1HQO9%3D6-2THWsPF60kJr5xZosu%2BY%3DwSx1LRA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.