Dear Experts,
If it is to be used for ASME Certification job not allowed. For ASME Non-Certification jobs, it is possible to make SORF, BLRF excepting WNRF. Please refer ASME B16.5. From WNRF Flange, you can make SORF, SWRF except Blind flange.
Hope, the above is clear to you.
Thanks & regards,
C. R. Gandhi
From: 'Shashank Vagal' via Materials & Welding <materials-welding@googlegroups.com>
To: Materials & Welding <materials-welding@googlegroups.com>; GODWIN SHIN <godwin.shin@partner.samsung.com>
Sent: Wednesday, January 27, 2016 3:29 PM
Subject: [MW:24178] 600 Lb to 300 Lb
Gents,
Is it possible to make a 2" dia 300 Lb flange out of 600 Lb by machining, and what parameters are critical to check for conformance.
BR,
Shashank C Vagal
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/159059557.789255.1453888745288.JavaMail.yahoo%40mail.yahoo.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment