Thursday, October 1, 2015

Re: [MW:23635] Volumetric NDE for Welder Qualification of Unassigned Material / ASME Sec IX

Yes, the qualification is restricted to that unassigned material

On 1 October 2015 at 06:24, Vino Varghese <vinopvarghese@gmail.com> wrote:

Experts,

Does the Code allows the Volumetric NDE for Welder Qualification for Unassigned material or similar composition?

I am aware about the exemption which Code states for some P number material and the Code case, but not sure about the Unassigned material/similar composition.

Looking forward for your as usual support.

Regards
Vino, Doha


--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CADxVub%3DJd1yQxmEYqqG3OzopLweO074wN1A_43vZH5ouCRmsQw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

No comments:

Re: [MW:35289] Welding consumable for S355J2WP material

S355 J2 WP  is a weathering structural steel  It has better atmospheric corrosion resistance. Use E 8018 - W1/W2  Electrodes This is regular...