[MW:23651] RE: 23650] L.O.P Criteria according to AWS D1.1

Dear Sir

 

Regarding table 6.1 point 2 – weld/base metal fusion complete fusion is required so lack of penetration is not allowed for full penetration welds. For partial penetration welds the actual depth of penetration can't be examined by visual examination.

 

Met vriendelijke groeten / Best Regards,

 

Herman Pieper

QA-QC Inspector / CSWIP + IWI-C Welding Inspector / IWT / Materials Expert

 

Job van der Havestraat 6

8384 DB, Wilhelminaoord

Cell: +31 6 51691215

 

Van: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] Namens Mehdi Vafakhah
Verzonden: zaterdag 3 oktober 2015 12:24
Aan: Materials & Welding
Onderwerp: [MW:23650] L.O.P Criteria according to AWS D1.1

 

 Dear experts

whats the L.O.P Visual Inspection Acceptance Criteria according to AWS D1.1 ?

Best regards

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/60468822-24e4-4a64-8127-db4fde3a250a%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.