Re: [MW:21435] Reinforcing Pad Tale Hole/Testing Port Shall be seal welded after pressure test

Hi,

Threaded bolts with sealing grease is a more normal practice, seal welding these holes may become problematic in future if you want to use them for corrosion checks.


With Best Regards,
Shashank C Vagal (Quality Adviser)




-------------------------------------
On Sun, 20/7/14, LALU RAJENDRAN <lalucpt@gmail.com> wrote:

Subject: Re: [MW:21432] Reinforcing Pad Tale Hole/Testing Port Shall be seal welded after pressure test
To: "materials-welding@googlegroups.com" <materials-welding@googlegroups.com>
Cc: "madhusudhan yemmina" <yemminamadhusudhan@gmail.com>
Date: Sunday, 20 July, 2014, 6:03 PM

Hi Mr.
Madhusudhan, 

No, but I have
seen in some of the Client specification states that it
shall be seal welded after pneumatic test. since it is a
tapped hole, you can use suitable bolts to seal and prevent
corrosion.

Regards,


LALU R.P



On Sun, Jul 20, 2014
at 11:57 AM, Yemmina Madhusudhan <yemminamadhusudhan@gmail.com>
wrote:

Is there any standard which states weep hole to be
seal welded after completion pressure test.


Regards
Yemmina MadhusudhanMechanical
Engineer



--

To post to this group, send email to materials-welding@googlegroups.com

To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com

For more options, visit this group's bolg at http://materials-welding.blogspot.com/

http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm


 

The views expressed/exchnaged in this group are members
personel views and meant for educational purposes only,
Users must take their own decisions w.r.t. applicable
code/standard/contract documents.

---

You received this message because you are subscribed to the
Google Groups "Materials & Welding" group.

To unsubscribe from this group and stop receiving emails
from it, send an email to materials-welding+unsubscribe@googlegroups.com.

For more options, visit https://groups.google.com/d/optout.






--

To post to this group, send email to
materials-welding@googlegroups.com

To unsubscribe from this group, send email to
materials-welding+unsubscribe@googlegroups.com

For more options, visit this group's bolg at http://materials-welding.blogspot.com/

http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm

 

The views expressed/exchnaged in this group are members
personel views and meant for educational purposes only,
Users must take their own decisions w.r.t. applicable
code/standard/contract documents.

---

You received this message because you are subscribed to the
Google Groups "Materials & Welding" group.

To unsubscribe from this group and stop receiving emails
from it, send an email to materials-welding+unsubscribe@googlegroups.com.

For more options, visit https://groups.google.com/d/optout.


--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm

The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.