Re: [MW:21413] Gas cutting to take samples for testing.

dear sir,

yes it affects, thats why some amount of sample portion discarded from
samples using machining to make specified specimien size after gas
cutting, same discarded material portion is specified in applicable
materail code also plese check sa370 for more.

On 7/15/14, dhirajdhomne <dbdhomne@gmail.com> wrote:
> Dear Sir
>
> Please guide does sample drawn by gas cutting change properties of sample
> which affect result in physical and chemical properties.
>
> Most of manufacturers use this practice in stock of raw material (plate,
> angles, TMT bars)
>
> Regards
> Dhiraj Dhomne
>
>
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
>
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
> ---
> You received this message because you are subscribed to the Google Groups
> "Materials & Welding" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to materials-welding+unsubscribe@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>


--
Thanks & regards,

*kunal SAINI*
*CSWIP3.1 / Surveyor*
*Bureau Veritas*
*+91-9936002727*

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm

The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.