Normally two , but Two times repair is just an arbitrary statement, not supported by code reference directly, but this is basically good engineering practice and to some extent reliable one.
On Wednesday, 23 July 2014 06:19:42 UTC+5:30, pradipsil wrote:
-- If you want to do three times repair, base materials & welding consumables shall be simulated for the three times to ensure it retaining mechanical properties after three cycle of PWHT time and temperature if undergoes PWHT
If you specific case, What you must do to take care : When running a PQR, also run additional repair PQRs. Repair once, twice, thrice..... with WPS conditions and subject welded coupons to mechanical tests (impact mainly) and see at what level you have to stop.
Regds/Jignesh
On Wednesday, 23 July 2014 06:19:42 UTC+5:30, pradipsil wrote:
Dear All,Regards
How many times PWHT can be done in a particular P-91 material joint with code reference.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment