Dear Osman,
In Tankguard 412 data sheet they are silent about mixing thinner in paint during paint. As per the data sheet thinner 17 can be used only to clean the paint equipment's after application. Normally mixing thinner with paint will impact in DFT & curing time.
It you would have already used it better provide additional ventilation & ensure paint is ready for over coating.
It would more better to take suggestion from Jotun technical team.
Regards,
Hema Santosh.
On Thu, Apr 3, 2014 at 1:11 PM, Ahmed Osman <a.osman81@yahoo.ca> wrote:
--Dears ,is this approved for using thinner with painting which is mentioned in its data sheet to be 100 % SVmy case is Tankguard 412 .. solid volume 100%+- 2 ... they used thinner 17 ... is this thinner affect chemical structure of resin or thinner will just vanishBest Regards ,ENG. Ahmed Osman
ASNT NDT level IIICSWIP welding
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment