Tuesday, April 1, 2014

Re: [MW:20455] qw 403.9

Dear Sandeep,

If the thickness of the single pass/run is more than 13mm,then the maximum qualified thickness will be restricted to 1.1 times of the coupon thickness.

Regards
Dhamodaran
+974-7736 7260
On Tuesday, 1 April 2014 3:55 PM, Sandeep Maan <sandeepmaan@altechinfra.com> wrote:
Dear expert

Can anybody tell me the meaning of qw 403.9
 for single pass or multipass welding  in which any pass is greater than 13mm thick, an increase in base metal thickness beyond 1.1 times that of the qualification test coupon.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.


No comments:

[MW:35346] Cast-iron welding

Any advice for cast iron welding Sent from Yahoo Mail for iPhone