Monday, May 27, 2013

[MW:17818] 9.3.8 Slag Inclusions API 1104 RT

Dears experts\
there is acceptance  for ISI & ESI  RT  1104  my question  is  in case one of these conditions is found  for example
when i  have done interpretation I found indication ESI has width   2mm  and length 9mm  this indication rejected because it exceed 1.6mm   or not because  it should be has length more then 2" to rejected .  
regards

No comments:

Re: [MW:35686] HDPE WPS

Refer ASME SEC IX  There is separate chapter for Plastic welding . Based on that you have to prepare  Sent from my iPhone On 21 Jun 2025, at...