Saturday, October 29, 2011

Re: [MW:12792] flush type

Dear Ali,
All flush type connections we need to PWHT which is contact with bottom and shell plate connections that as shown in 
API 650 figure 5-12
This all requirements having in API 650 para 5.7.4 states which condition we need to do PWHT. Because we are not only 
doing PWHT for flush type clean out fittings, even material group, thickness restriction, thickened insert plate also doing PWHT. I have attached that page for your reference.
Please feed back to me,
Regards

L.Venkadesh

On Fri, Oct 28, 2011 at 9:27 PM, Ali Asghari <asghariali@rocketmail.com> wrote:
Dear Venkadesh
In API650, there is requirement for PWHT of tanks in chapter3, but said for all flush type clean out must be stress relieved by PWHT.
now i want to know, it is  applicable for all drain  that contact with bottom plate or not?
Regards


From: venkadesh lakshmanan <venkadeshmech@yahoo.com>
To: materials-welding@googlegroups.com
Sent: Friday, October 28, 2011 9:10 AM
Subject: Re: [MW:12786] flush type

Dear Ali,
             Flush type clean out using for drain the inside liquid completely. Because this elevation will be the same bottom plate elevation. but the nozzles all having some height from the bottom.

L.Venkadesh

On Thu, Oct 27, 2011 at 4:34 PM, Ali Asghari <asghariali@rocketmail.com> wrote:
Dear All
is there a specific meaning for flush type cleanout in API650?
if yes, what is diffrence between it with other nozzles?
Regards
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.


--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...