Thursday, October 20, 2011

Re: [MW:12729] existence of

hi,
ur question is what kind of water,yes it may be hydrotested watr.
regarding rejection ,can u check it in a work shop....if it malfunctioning u can reject.


On Thu, Oct 20, 2011 at 2:30 PM, ENAYAT ZAREI <zarei.enayat@gmail.com> wrote:
Dear All,

can anybody help :

we have some some small bore (1/2" ~ 1 1/2") gate valve in stock, when we open the valve by hand wheel and wedge goes up, some water comes out from inside of valve:

now my questions :

1-what is this water i n valve?
2-is it related to Hydro test?
3-can we reject these valves?

your prompt reply would be highly appreciated.

Regards,
Zarei

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.



--
Thanks and Regards................?
 Md Ahmed 
[  Mech ,Inspection engineer!]
knpc  ] ......

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...