Hai Bahtula,
Thanks for your reply. Ya we have almost 9mm hi-lo through out the circumfrence. In some location around 13mm hi-lo.
Shall we accept this spools?
Regards,
Gulam Kader
On Mon, Jan 11, 2010 at 8:18 AM, Bathula Raghuram (Mumbai - PIPING) <R.Bathula@ticb.com> wrote:
You may use S58 as per SA960 for special dimensions, however you may note that only fittings ends are calibrated to the bore diameter, hence in the middle (when you cut) you may get an oval shape resulting a mismatch with the bore of an adjoining component
Piping designers often ignore this (as they will have to generate new commodities for 30°, 45° etc.) instead they assume that 90 ° can be cut into the required angle at site and this is one of the major issue during fabrication
-----Original Message-----
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of gulam kader
Sent: Sunday, January 10, 2010 3:24 PM
To: Materials & Welding
Subject: [MW:4006] cutting of 90 deg elbow in to 45 deg elbow
hi,
I am new to this group. In our project we have one problem. For shortage of 45 deg elbow, they want to cut the 90 deg factory made seamles elbow ( 52" size) in to 45 deg elbow. Is this allowed by the code or any restriction in the code. For this which code we should refer. please help me in this issue.
regards,
Gulam Kader
Filtered by Hosted Filtering
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
படியுங்கள் பரப்புங்கள் பாதுகாத்து வையுங்கள்
விடியல் வெள்ளி மாத இதழ்
POPULAR FRONT OF INDIA - PFI
SOCIAL DEMOCRATIC PARTY OF INDIA - SDPI
No comments:
Post a Comment