RE: [MW:4020] LIP type nozzle to shell/Head weld joint category as per ASME

Request to check up figure UW 16.1 f (1) to (4) of ASME Section VIII Div. 1, this gives acceptable type of joints for nozzle to shell, head (category D joints)

Regards,

Jignesh R Rana
Chief Engineer - INSP. & EXP.
UHDE India Ltd.

-----Original Message-----
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of PEMMARAJU RAGHAVENDRA
Sent: 11 January, 2010 1:14 PM
To: materials-welding@googlegroups.com
Subject: Re: [MW:4016] LIP type nozzle to shell/Head weld joint category as per ASME

As per ASME code Sec.VIII Div.1,2&3, the same is Category D.
The category tells us about the location of the joint in a pressure vessel. Not the lip type of weld geometry.
Regards,
Raghavendra

Larsen & Toubro Limited
www.larsentoubro.com

This Email may contain confidential or privileged information for the intended recipient (s) If you are not the intended recipient, please do not use or disseminate the information, notify the sender and delete it from your system.

>>> romio dabre <romiomdabre@gmail.com> 11/01/2010 01:08 pm >>>
Dear all
What is the joint catagory of LIP type nozzle welded to shell or head? Is it
A or D catagory?

Thks

Messages sent by email can be manipulated by third parties and are therefore generally not legally binding. This message contains confidential information that may be privileged or protected from disclosure. If you are not the intended recipient, please be advised that you have received this email by mistake. You are requested to notify us immediately by return email and delete this email from your system. Any use, copying, distribution or printing of information by the unintended recipient is strictly prohibited. Thank you.

Regd. Office: Uhde House, Vikhroli (West), Mumbai 400 083, India
Tel: 91-022-6796 8000, Fax: 91-022-2578 4327 Website: www.uhdeindia.com