You can use E410 or E410NiMo for SMAW, refer SFA 5.4 of ASME Sec II-C for preheat and PWHT requirements.
Regards
Prem Nautiyal
Cell:9820313278
On Wed, 25 Nov 2009 10:21:55 +0530 wrote
>dear members,what is the filler material to be used for ss410 ,is there any pwht requirements for this material ,if yes what would be the cycle time .
-- With regards,Surya Prakash GajjallaASSOCIATED ENGINEERING SERVICES 3-5-944/220-221 panchavatimall narayanaguda hyderabad india 500029.www.aesinspections.com
0091 9885162668
--
>
To post to this group, send email to materials-welding@googlegroups.com
>
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
>
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
>
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
>
PREM S NAUTIYAL
CELL : 9820313278
 |
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment